TWTC-2000P Disc brush glass washing machine
Washer used before coating line or digital printing line
- Polishing power can be used in disc brush washing zone.
- Air knives will be set after disc brush zone to reduce dirty water goes to next zone.
- Extended entry and exit.(Optional)
- Drop down section for passageway.(Optional)
- Universal wheels set on exit, glass can be unloaded from two sides.
- Transparent covers on top of washing zone for daily inspection.
- Side covers hang on the machine and can be taken down quickly.
- Each brush tray is with separation to avoid water crossed contaminated.
- Level sensors equipped in the tank with alarm lighting and bell.
- Each section is with separation to prevent that too much water goes in the other section.
- Last rinsing section is set with sensor to provide DI water, DI water will be supplied only when glass passes to save water.
|Max. Glass Size||2000 mm or customized|
|Min. Glass Size||400*400 mm|
|Glass Thickness||3～25 mm|
|Working Speed||0.6～8 M/MIN|
|Disc brush||1 bridge or customized|
|Roll brush||3 pairs of customized|
|Water tank||5 units|
|Water heater||5 units|
|Air Knives||2 pairs ( one is straight and one is slanted)|
|Table Height||900±50 mm|
Get A Free Quote!
Send us your enquiry and budget and you will get a free quote within 24 hours.